DayStar KJ04520BK Руководство по установке - Страница 8
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары DayStar KJ04520BK. DayStar KJ04520BK 8 страниц. 2007 and up jeep wrangler jk body lift 2 door and 4 door
14. Close the hood .
15. Check that all the bolts and nuts are tighten down to spec.
16. On 2010 and up JK you will need to cut 2 flat notches in the 2 rear body mount
bolts as seen in photo so the washer will not hit the nuts.
17. Check all bolt and nuts after 500 miles.
18. With the vehicle on the ground cycle the steering wheel side to side and
inspect suspension components, brake lines and tires to ensure there are
not any clearance issues. Jounce the suspension to assure front suspen-
sion operates freely, brake lines retain proper slack at full extension and
that they remain clear of springs or other obstructions.
19. Install "Warning to Driver" decal on the vehicle's sun visor or dash.
The decal must be placed in a conspicuous location. Anyone that oper-
ates the vehicle must be made aware of the changes made.
20. After 500 miles of driving re-torque all of the hardware associated with
the Body lift kit installation to, factory specifications. Repeat torqueing
procedure as required
Cut sides of
.
8
Learn more about suspension parts on our website.