AFG 3.0 AE Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Эллиптический тренажер AFG 3.0 AE. AFG 3.0 AE 20 страниц.
Также для AFG 3.0 AE: Руководство пользователя (20 страниц)
Печатать страницуB E F OR E YO U BEGI N
CONGRATULATIONS!
on choosing your elliptical. You've taken an important step in developing and
sustaining an exercise program! Your elliptical is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your elliptical can improve the quality of your life in so many ways.
HERE ARE jUST A FEW OF THE HEALTH BENEFITS OF ExERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new
elliptical will help you eliminate obstacles that prevent you from exercising.
Inclement weather and darkness won't interfere with your workout when you
use your elliptical in the comfort of your home. This guide provides you with
basic information for using and enjoying your new machine.
LOCATION OF THE ELLIPTICAL
Place the elliptical on a level surface. There should be 6 feet of clearance
behind the elliptical, 3 feet on each side and one foot in front for the power
cord (See diagram to the right). Do not place the elliptical in any area that
will block any vent or air openings. The elliptical should not be located in a
garage, covered patio, near water or outdoors.
ADJUSTING LEVELERS
3.0 AE: Adjust the rear levelers so that the elliptical is level on the floor. Then adjust the FOOT LEVELERS
so they are snug with the floor.
4.0 AE: Adjust the 2 rear levelers so that the elliptical is level on the floor. Then adjust the third leveler
located under the BASE FRAME so it is snug with the floor.
3.0 AE
FOOT LEVELER
ADJUST HEIGHT
LOCK ADJUSTMENT
1
3.0_4.0 AE_Rev.1.6.indd 16-17
FOOT LEVELER
ADJUST HEIGHT
LOCK ADJUSTMENT
4.0 AE
BASE FRAME LEVELER
ADJUST HEIGHT
LOCK ADJUSTMENT
ELLI PT ICAL OPER AT ION
POWER
Your programmable elliptical is powered by a power supply. The power must be plugged into the power jack,
which is located in the front of the machine near the STABILIZER TUBE. The 4.0 AE has its power switch in the
same location. The 3.0 AE has it's power switch on the back of the console. Make sure they are in the
"ON" position.
INCLINE OPERATION
If the stop button is pressed to pause the program, the incline motor will remain at its current height. To
return the incline to 0%, press start and change the incline to 0% before dismounting. If the stop button is
held for 3 seconds to reset the console, the incline will return to 0%.
Do not operate the elliptical if the power cord or plug is damaged.
WARNING
If the elliptical appears to not be working properly, do not use the elliptical.
Our ellipticals are well built and heavy, weighing up to 280 lbs! Use care and
WARNING
additional help if necessary when moving.
FOOT POSITIONING
Your elliptical offers a variety of foot positions. Moving your foot to the forward most position of the foot pad
increases your step height, which will create a feel similar to a step machine. Placing your foot toward the back
of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run.
Your elliptical also allows you to pedal both forward and backwards to offer a variation to your workout and to
focus on other major leg muscle groups such as your hamstrings and calves.
MOVING
Your elliptical has a pair of transport wheels built
into the FRONT STABILIZER TUBE. To move, first
remove the power supply and firmly grasp the
REAR STABILIZER BAR, carefully lift and roll.
1
8/27/07 3:36:45 PM