Automatic Mirage M 801E Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Усилитель Automatic Mirage M 801E. Automatic Mirage M 801E 17 страниц. Multi-zone digital amplifi er manual

Печатать страницу

Typical System Configuration (Continued)

Fig. 1 depicts a typical configuration where

the

M-801e

amplifier is providing audio

into six of the possible eight listening zones.

Only three of the zones are depicted.

Each zone consists of a room with

a pair of speakers and a suitable

controller. Each zone may be listening

on any of the connected sources:

• Mirage Media Server

• Satellite Receiver

• Tuner

• CD Player

Controllers

Each zone has a specific control

requirement. Choose controllers

that best suit the application.

Zone 1 – The Gym: Speakers & KP-6 Keypad

Zone 2 – The Study: Speakers & KP-iOS Keypad

Zone 3 – The Lounge: Speakers & Tablets

The KP-6 Keypad may be plugged into

any of the four controller ports.

Source control IR emitters are plugged

into the IR ports. There are ten IR ports:

IR1 - IR8, and IR9 & IR10.

IR 1 – 8 route source specific IR signals

from connected controllers, while IR9 &

IR10 output the common IR or the sum

of all received IR signals.

These ports may be used for source equip-

ment that is common to all zones.

When controlling a stand alone

using an iPad or other web tablet, the

M-801e

must be connected to a wi-fi

enabled ethernet router and the web tablet

browser must be directed to the M-801e's

IP Address. The M-801e's web application

also provides source control functionality.

Speakers

Speakers in each zone are connected to the

amplifier by "Home Run" speaker cables.

Source Equipment

The

M-801e

RCA audio inputs for connecting

to source equipment. These input

channels feature coax digital inputs.

If a signal is present on the digital input,

it takes precedence over the analog

input. There are four additional Digital

only input channels featuring both coax

and Optical inputs. Any source can be

listened to in any zone, simultaneously.

All eight zones may select the same source,

in such circumstances there is a possibility

that all eight zones may be trying to control

that source (not always desirable) so a system

should be well planned and where appropriate

additional source equipment installed.

Preamplifier Zone Outputs

The preamplifier output zones are completely

independent of the digital amplifier zones.

These can optionally be used for locations

where a high or lower power amplifier /

speaker would be required. A third party

power amplifier is required to power the

zone speakers. Alternatively a preamplifier

zone may be zone linked to one of the

digital amplifier zones, and provide line

level outputs to the zones sub-woofer.

Mirage Media Server

When pairing your M-801e amplifier with a

Mirage Media Server, be sure to use the Mirage

M-801e

Media Server's web configuration Sources

page and follow the pairing process there. This

will ensure full control via the Mirage iOS and

Android applications.

amplifier has eight stereo