Emeril Lagasse Elite Home HF-8360T-S Руководство пользователя - Страница 16
Просмотреть онлайн или скачать pdf Руководство пользователя для Фритюрница Emeril Lagasse Elite Home HF-8360T-S. Emeril Lagasse Elite Home HF-8360T-S 20 страниц.
Troubleshooting
Problem
The appliance
does not work
Food not cooked
Food is not
cooked evenly
White smoke coming
from appliance
French fries are
not fried evenly
Fries are not crispy
Error Codes
16
Emeril Lagasse AirFryer Elite Home™
Possible Cause
The appliance is not plugged in.
The appliance is plugged into an outlet that is shared
with other devices.
The appliance has not been turned on by setting the
preparation time and temperature.
The appliance might have been turned off. If the
Power button is pressed while cooking, the Auto
Shut-Off mode will be triggered.
The appliance is overloaded.
The temperature is set too low.
Some foods need to be turned
during the cooking process.
Foods of different sizes are being cooked together.
Oil is being used.
Accessories have excess grease residue
from previous cooking.
Wrong type of potato being used.
Potatoes not blanched properly during preparation.
Too many fries are being cooked at once.
Raw fries have too much water.
Display
Shown
E1
E2
Solution
Plug the Power Cable into a wall socket.
Plug the appliance into a dedicated
power outlet.
Press the Power Button.
Select a time and temperature. Press the Power
Button again and cooking will begin.
Press the Power Button. Select a time and
temperature. Press the Power Button again and
cooking will begin.
Use smaller batches for more even cooking.
Raise temperature and continue cooking
Check halfway through process
and turn food if needed.
Cook similar-sized foods together.
Wipe down to remove excess oil.
Clean the components and appliance interior after
each use.
Use fresh, firm potatoes.
Use cut sticks and pat dry to remove excess starch.
Cook less than 2 ½ cups of fries at a time.
Dry potato sticks properly before misting oil.
Cut sticks smaller.
Add a bit more oil. Blanch cut potatoes.
Possible Cause
Broken circuit of the thermal sensor
Short circuit of the thermal sensor
Solution
Call Customer Service
Call Customer Service