HiBoost Home 4K Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Удлинитель HiBoost Home 4K. HiBoost Home 4K 20 страниц. Mobile signal booster
Печатать страницу
OFF: In some rare situations the ALC or ISO will not be able to compensate for an
oscillation condition or a downlink overload. When this happens the booster will
shut off in the affected band and the LCD "OFF" indicator will flash. Pressing the
"SET" button will display which band or bands are affected.
. LED Status
LED
Power LED
Alarm LED
ISO LED
Status
Green
Off
Green
Slow Flashing
Green
Quick Flashing
Green
Quick Flashing
Red
Green
Slow Flashing
Green
Quick Flashing
Green
Quick Flashing
Red
Definition
Normal
DC power problem
Output power is
not maximum.
Full output power.
Output power is too high.
The booster automatically
shuts off for protection from
excessive downlink signal
from tower.
Check coverage, leave
as is if it's good; if the
coverage is poor,
please check the
Troubleshooting section
to get solutions.
Not working properly.
Please check the
Troubleshooting section
to get solutions.
No loopback or no self-oscillation. Working properly.
Slight loop back or self-oscillation.
Deep loop back or
self-oscillation.
The booster automatically
shuts off for protection due
to very severe self-oscillation.
Not working properly.
Please check the
Troubleshooting section
to get solutions.
When the LCD is in the fixed display mode, Press the "SET" key for 3 seconds and
it will start up in the Gain Setting Mode. Press the "SET" key for 3 seconds, and
11/18