HiBoost Mini F08GI-5S-BTW Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Удлинитель HiBoost Mini F08GI-5S-BTW. HiBoost Mini F08GI-5S-BTW 14 страниц.

• BOOSTER – select location

•Install the booster in an area that is protected from the weather,

properly ventilated and is away from excessive heat and moisture.

• DONOR ANTENNA (OUTDOOR)- select location

•Mount the signal (outdoor) antenna in an elevated outdoor location so

that it points towards the cellular tower and away from where the inside

antenna will be located.

• OUTDOOR COAXIAL CABLE - select location

•The outdoor coaxial cable is used to connect the donor (outdoor)

antenna to the booster.

• INDOOR COAXIAL CABLE- (if used)

•The indoor coaxial cable is used to connect the server (indoor) antenna

to the booster.you can choose the indoor omni antenna or panel antenna .

• SERVER ANTENNA (indoor)

•The ideal location for the distribution antenna will be the area of your

property where you need to improve the signal most.

•NOTE:The signal strength will be strongest closest to the antenna.

•IMPORTANT: The signal antenna (outdoor)should always be separated from the

distribution antenna (indoor)by at least 20 vertical feet including the separation

of a thick barrier such as a roof or a wall. Depending on the strength of your

！

outdoor signal, the weaker the signal the less separation distance is required.

•LIGHTNING SURGE PROTECTOR- (SOLD SEPARATELY)

•The lightning surge protector connects in between the signal antenna and the

booster.

•IMPORTANT: Lightning surge protector must be grounded.

• COMMISSIONING THE SYSTEM

5 / 14