DaytonAudio DA10T Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель DaytonAudio DA10T. DaytonAudio DA10T 12 страниц. 10w pa mixer-amplifier 70v/100v
Печатать страницу
4. CONNECTIONS
SPEAKER CONNECTIONS
70V 100V
COM 4-16
4-16
The 4-16 ohm and 70V/100V terminals cannot both be
used at the same time.
Impedances indicated in the figures represent the total
speaker system (load) impedances.
Be sure to replace the speaker terminal cover after speaker connections have been made.
5. OPERATION
OPERATION
You can choose only two of the four output connectors
to work together. If voltage is 70V/100V the speakers
must have a transformer, make sure the total power
wattage of speaker is 15% less than the power wattage
of amplifier.
TROUBLESHOOTING
Problems
1. No power or wrong
All wires are connected
2. Fuse is blown
properly but there is no
3. Volume is turned off
audio output
4. No input signal
1. Overloading or short circuit
Alarm sounds when
2. 2.Voltage is not stable, too
power is turned on
1. Product is in protection
No output
2. Wrong wiring or connections
70V 100V
COM 4-16
490
70V LINE
Cause
connection
high or low
mode due to high
temperature or malfunction
COM 4-16
(DA10T)
MUTE FUNCTION
1. TEL has priority over all inputs.
2. MIC 1 is second priority, adjusting the mute level
can override all other input signals except for the
TEL signal.
7
70V 100V
1000
(DA10T)
100V LINE