HiBoost F23 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель HiBoost F23. HiBoost F23 19 страниц.

After 3s

You can long press the control button"AN2" for 3s, so that the LCD will enter to the

page turning query mode ,then click "AN1" or "AN3" make the LCD stay in the

output power interface.

The outdoor antenna receives the strongest signal when the booster's output

power reaches its full output power, please install the outdoor antenna in this

position.

Remark: when ALC shows up and is flashing, it means the receiving power is

stronger than suitable, it is recommended to adjust outdoor antenna to get a full

output power and to ensure ALC is not flashing. Or in case you don't want to do

anything, just please leave as it is since the booster will adjust itself. But when ALC

flashes, and the observed gain is more than 30dB less than rated gain value,

please do adjust outdoor antenna to decrease the receiving power.

In case you purchase a booster without display, please use telephone to test



signal near the window or on the top of the building. Normally the roof of the

building is a good choice. As shown from the above graph, you need test the

After 3s

Recommend to use the accessories in the package

After 3s

Display

in turn

After 3s