Automatic Solutions AB Руководство по установке и эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Система внутренней связи Automatic Solutions AB. Automatic Solutions AB 17 страниц. Gsm intercom system
Note: This unit is a 2G quad band system, operating on standard 2G network frequencies of
850/900/1800/1900MHz.
Please ensure the SIM card is a 2G compatible SIM card. The SIM may also
close
be 3G and 4G capable as well, as long as both the SIM and the network also
support 2G. Do not use a SIM card for a tablet, as these only support data, and
open
do not support voice and SMS. You simply require a mobile phone type SIM
card.
1)
Put the SIM into a phone to activate and register it with the network.
2)
If you are using pay and go, top up the SIM with some credit.
3)
Test that the SIM can make and receive calls and can send and receive a SMS.
4)
Ensure the power is OFF
5)
Slide the SIM card holder in the open direction, and carefully open the door. Do NOT
force it.
Codelock Keypad connections (Keypad versions only)
Tamper
N/C
COM
OUT3
+ -
12v from
GSM unit
OUT1 OUT2
P a g e
| 5
Inserting the SIM card
Connections on the GSM Controller
close
open
12-15v dc
INT Lock
O/P1 inhib
Sense
(-)GND
DU out
N/O
K or A
N/C
GSM
modem
Optional
input limit
switch
from gate
Output
to gate
Exit button
or lock
Commonly used connections
Outputs – This keypad has 3 outputs. All can be
programmed for momentary and latching operation.
For gate systems and AC strike locks, connect a
keypad relay (normally open) in parallel with the GSM
module relay. For magnetic locks, connect in series
with normally closed contact.
Egress – This is for an optional exit button input,
connected across this terminal and GND (-).