Automatic Solutions ABK Руководство по установке и эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Система внутренней связи Automatic Solutions ABK. Automatic Solutions ABK 17 страниц. Gsm intercom system
Печатать страницуAdvanced connections
INT Lock – Used to operate a door in conjunction with another keypad. 24v dc max voltage,
100mA sink.
O/P1 inhib – When closed, this disables all codes for relay group 1.
Sense – N/C connected to (-)GND, to be connected to N/C door contact. Can be used to generate
door open or tamper alarm.
DU out – switches to (-) ground after the Duress Code is entered. Used to trigger alarm zone, or
buzzer to notify guard. 100mA sink, 24VDC.
K or A – Not used.
Connecting DC magnetic
lock
GSM
Lock
output
Optional
keypad
Separate
output
Perform a final check of wiring and ensure the antenna is connected before switching on the
power. Once the power is switched on, the power LED should illuminate.
Power LED
GSM LED
Searching
Network found
CPU LED
Standby
Busy
P a g e
| 6
Wiring Tips
Connecting AC/DC strike
lock
GSM
output
Optional
keypad
output
PSU
Powering Up
GSM
modem
close
open
Lock
Separate
PSU
TIPS:
My GSM LED is still searching...
-Check the SIM card is registered and can make a call
in a phone.
-Check the SIM card is seated correctly. Power off,
clean the contacts on the SIM and the GSM unit, and
reinsert the SIM.
-Check power cable distance and thickness.
-Increase antenna height.
-Change network.
-Move antenna away from metal objects or overhanging
shrubs.
-Fit a high gain antenna.
Connecting automatic gates
GSM
Gate controller
output
Optional
keypad
output