DaytonAudio IO8XTW Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики DaytonAudio IO8XTW. DaytonAudio IO8XTW 8 страниц. 8" 70/100v 8 ohm indoor/ outdoor 2-way speaker with bass radiator
Печатать страницу
7.
Transformer settings
Depending on your application you will need to adjust the transformer settings. If
you are using stereo amplifier the transformer should set to the 8 ohm position. If
you are using a 70V/100V amplifier set the dial to the desired 70V/100V tap setting.
Remove the endcap to expose the settings dial, this adjustment can be made with
flat head screw driver. Replace the endcap once the adjustment has been made.
70V
12.5W
100V
8.
Final Installation
To install the speaker into their final location, place it into the yoke bracket and align
the threaded inserts in the enclosure for the endcap screws with the matching holes
in the yoke brackets, then install the endcap screws. Select an angle for the enclo-
sure that will allow the entire listening area to be within line-of-sight to the tweeter
dome, which is visible through the grill, and then tighten the endcap screws by hand.
At this time, installation is complete.
5
70V
12.5W
100V