Agrimate AM-909-NEO 2S Series Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Краскопульт Agrimate AM-909-NEO 2S Series. Agrimate AM-909-NEO 2S Series 20 страниц. Knapsack power sprayer

Печатать страницу

1. Turn on the gasoline switch until the gasoline flows out the clear plastic pipe. (Fig 3)

2. Close the choke totally (Fig 4)

If the engine is heated, the choke must be totally opened.

3. Open half the throttle.

4. Draw the starter several times slowly, and then draw quickly.

Note: if the excessive gasoline causes the difficult start, take down the ignition plug and the

input pipe, open the choke and the throttle totally, draw the starter several times then install

the input pipe and start the engine. After the startup, open the choke totally.

Fig 3

1. After the engine starts, run 3-5 minutes at a low speed

2. When the engine is heated enough, adjust the throttle handle to the corresponding speed.

3. Note: don't accelerate abruptly due to bad lubrication of the engine at the beginning of startup.

4. Avoid the speedy idle motion and over speed motion. If the throttle is totally opened, the

engine will run over speed, which not only shortens the service life of the engine but also

causes more problems in the engine.

1. Reduce the gasoline engine to the slowest speed and run 3-5 mins

2. Press the stop switch to stop the engine.

START UP

Open

RUNNING

STOPPING

The Choke Handle

Fig 4