Agrimate AM-K26708 Инструкция по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Краскопульт Agrimate AM-K26708. Agrimate AM-K26708 12 страниц.

USE-STOPPING THE ENGINE

USE:

Fill the liquid tank through the filter

provided to prevent the introduction of

foreign bodies (Fig 11-A)

Replace the filler cap (Fig 12-B) making

sure it is tightly sealed.

After starting the engine, adjust the liquid

flow by way of the pressure regulator (Fig

13-C). The regulator can be easily operated

when the sprayer is on the back of the

operator.

Operate the control valve to control the

Spray (Fig 14-D).

Warning: After starting the sprayer, operate the

control valve immediately to allow any residual air

trapped inside the pump to escape and to check that

the liquid is flowing normally. If the liquid does not

flow normally, operate the pressure regulator to

eliminate air from the pump. Never ever operate

the pump when the liquid tank is empty.

Warning: On completion of work, close the liquid

valve before stopping the engine.

Stopping the engine:

Set the throttle lever to minimum. Switch off the

engine by turning the stop switch to STOP.

Warning: After use of liquid chemicals, flush out

the pump immediately by filling the tank with clean

water and re-starting the sprayer.