Celestron 11047 Дополнение к руководству по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Дополнение к руководству по эксплуатации для Телескоп Celestron 11047. Celestron 11047 4 страницы. Advanced series telescope
Печатать страницу
The following is a supplemental addendum to the included instruction manual that explains the
new features and standard accessories of Celestron's Advanced Series Newtonian telescopes.
Please refer to this addendum for information concerning the specifications, new features and
standard accessories included with your telescope. Refer to the owner's manual for step-by-step
instruction on assembling and using your telescope.
The Advanced Series 8" and 10" Newtonians include the following standard accessories:
Diameter
Focal Length
Eyepiece
Finderscope
Software
The Celestron Advanced Series Newtonian telescopes offer additional features, heavier mounting
and larger apertures than ever before. The CG-5 German equatorial mount now includes ultra
sturdy 2" stainless steel legs for extra rigidity and vibration dampening.
The CG-5 tripod comes with an all metal center leg brace / accessory tray to give rock solid
support to the mount. To attach the equatorial mount to the tripod:
1. Place the equatorial mount on the tripod as
described in your owner's manual.
2. With the accessory tray removed, use the
mounting knob to thread the central rod into
the hole at the bottom of the equatorial
mount.
3. Slide the accessory tray over the central rod
so that each arm of the tray is pushing
against the inside of the tripod legs.
4. Thread the accessory tray knob on to the
central rod and tighten.
31061
200mm (8.0") reflector
1000mm F/5 Parabola
20mm - 1.25" (50x)
Mount
CG-5 Equatorial
Tripod
2" Stainless Steel
The Sky L1
C8-N
254mm (10") reflector
1200mm F/4.7 Parabola
20mm – 1.25" (60x)
9x50
CG-5 Equatorial
2" Stainless Steel
11047
C10-N
9x50
The Sky L1
Mounting Knob
Central Rod
Accessory Tray
Accessory
Tray Knob