Dynalink RTA1320 Руководство по быстрой настройке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Сетевой маршрутизатор Dynalink RTA1320. Dynalink RTA1320 7 страниц. Adsl2+ modem router
Также для Dynalink RTA1320: Технические характеристики (3 страниц)

Печатать страницу

Before you start

•
You will need your username and password from ISP.
•
All devices on your phone line will need to have an ADSL line filter attached to them. This includes
Telephones, Fax Machines, and Dial-up Modems etc. Plug these devices into the PHONE socket of
the ADSL line filter. Then plug the ADSL filter into the jack point.

Installing your Modem

Note:
The following instructions relate to creating an Ethernet broadband connection i.e. installing your modem using an
Ethernet cable. Refer to the setup guide on the Installation CD for this and for setup of Apple MAC computers.
Step 1:
Turn off your computer.
Step 2:
Plug one end of the Ethernet cable into the socket marked "Ethernet" on the back of the
modem. The other end of the cable is plugged into the Ethernet socket on the back of your
computer.
Step 3:
Plug one end of the Grey Phone Cable into the socket marked (DSL) on the back of the modem.
The other end of the cable is plugged in to the socket marked (ADSL) on the ADSL Line Filter.
Step 4:
Plug the line filter into the wall jack point.
Step 5:
Plug the power adaptor into the "PWR" socket on the back of the modem.
Plug the other end of the power adaptor into the wall socket.
Step 6:
Turn on the power at the wall socket. Turn on the modem using the power switch
Step 7:
Turn on your computer.
Step 8:
Open your internet browser (ie Internet Explorer) and enter the address http://192.168.1.1
Enter admin for both User Name and Password for the Connect to Internet page.