Dynalink RTA770 Руководство по быстрой настройке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Сетевой маршрутизатор Dynalink RTA770. Dynalink RTA770 16 страниц. Adsl router/modem

Печатать страницу

ADSL Router Quick Set-up Guide

Important

This Guide is intended to get you started quickly. We have made

the factory default setting of this router suitable for Australia

All you need is to follow through the steps we describe here.

This Guide should be read in conjunction with the RTA77x Series

ADSL Router User's Manual

. It is provided as a PDF file on this

CD. To view or print the User's Manual, go to the previous menu

ADSL Router (RTA770) and click the View User Manual button.

Important safety notes can be found on page III of the User's

Manual. Advanced users or users who have other setup

preferences should also read the User's Manual.

If you choose to connect via the Ethernet port, no driver is

required. If you choose to connect via the USB port, you will

need to load a driver. A driver is only available for Windows 98,

ME, 2000 and XP systems. The drivers are found on this CD. To

install a driver into Windows, go to the previous menu ADSL

Router (RTA770) and click the Modem drivers button.

Notes for this page:

In Australia the majority of ADSL subscribers get PPPoA service

by default. Your router is preset to meet this requirement. If your

ISP specifies the service as PPPoE, an extra step is then required

to configure the router in PPPoE mode. Instructions will follow

to take you to Section 6 – Configuration for PPPoE service.

The User's Manual available on this CD was written for

international users. In Chapter 5 – Connection Mode, only

references to PPPoA & PPPoE is relevant to Australian users.

Ignore all references to the value of VPI or VCI. In Australia VPI

is 8 and VCI is 35. These numbers are preset as factory default.

Do not change, or the router will not connect.