Automation Direct DL405 Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Системы ввода/вывода Automation Direct DL405. Automation Direct DL405 8 страниц. Fuse connector module zl-cm16tf2 cables and plc i/o modules
Также для Automation Direct DL405: Инструкция (3 страниц), Инструкция (3 страниц)

Печатать страницу

Steps

The main contents of this manual are organized into five steps:

Introduction

Build the Cable

Set the DCM Switches

Install the DCM and Start

the Network

Verify and Troubleshoot

Appendix

Additional reference information for the D4–DCM is available in this appendix:

RLL Communications

Programs

tells you about the Data Communication Module and its

uses. It lists other manuals you may need and tells you how

to get additional technical assistance, if necessary.

guides you through building the necessary communication

cable, covering physical and electrical specifications.

guides you through the setup of the rotary and DIP switches

to select communication parameters and network

addressing. It shows the proper method of inserting the

module into the base.

tells you what to consider when laying out your network

cable and how to terminate the individual conductors at the

networked devices. It gives you specific cabling examples,

showing pinouts for each device.

introduces the use of the DCM's status indicator lights as a

diagnostic tool. It gives you status indicator light patterns to

help you identify problems that could be preventing

communications.

provides helpful examples of Ladder Logic programs for

DCM communications.

3 3

Introduction