DynaLock 2013 Инструкции по установке

Просмотреть онлайн или скачать pdf Инструкции по установке для Замки DynaLock 2013. DynaLock 2013 4 страницы. Electromagnetic lock

DynaLock

705 Emmett Street Bristol, CT 06011-2728

Phone:(860) 582-4761 Fax:(860) 585-0338

Familiarize yourself with the gate and post conditions prior to installation. The lock must rigidly mount to the gate

post. The armature is designed to pivot slightly to compensate for reasonable misalignment.

Due to the wide diversity of gate designs custom mounting brackets may be necessary to facilitate the installation.

A DynaLock universal Gate Lock Bracket ("GLB" Option) is available to accomodate the majority of gate

applications and may be purchased separately.

HANDLING

The Electromagnetic lock and armature are

ruggedly constructed and designed to provide

years of trouble-free service. Care must be taken

during installation and use to keep the lock face

and armature face free from dirt, rust, burrs, paint,

or any other obstruction which may interfere with

the lock and armature making good contact.

Typical installation depicting the #2013 lock

mounted to the vertical gate post. The

armature is mounted to the gate using the

adjustable Gate Lock Bracket ("GLB"

Option), available from DynaLock.

2013 MANUAL - FORM 2013-001

PLEASE READ BEFORE INSTALLATION

GENERAL MOUNTING INFORMATION

SWING GATE

ELECTROMAGNETIC LOCK

INSTALLATION INSTRUCTIONS

The lock assembly and gate armature have been

plated for maximum corrosion resistance. To

ensure peak performance clean the lock and

armature faces with a mild detergent and a clean,

soft cloth, then apply a light coat of WD40 to

lubricate and protect these surfaces. This need

only be done when dirt build-up is noticed.

Typical installation depicting the use of "L"

brackets custom-fabricated to suit the gate.

The #2013 lock is mounted to the vertical

gate post. The armature is mounted to the

leading edge of the gate.

page 1

MODEL #2013

MAINTENANCE

SLIDE GATE

02/03