Gainsborough K202 Инструкция по применению - Страница 3

Просмотреть онлайн или скачать pdf Инструкция по применению для Открытый фонтан Gainsborough K202. Gainsborough K202 5 страниц.

Solar 3 Tier Bronze Water Feature

Please read and retain these instructions for future reference

7. Fill The fountain basin with 1 gallon of water, being careful not to overflow and cause splashing. Make

sure the water completely submerges the pump.

6. Place the pump cover around the pump housing. Place the lower tier on

the pump housing pipe and press down until it fits into the top of the pump

cover hole. Place the dish cover on the pump housing pipe followed by the

upper tier followed by screwing on the top piece.

Instructions for Use

K202

4. Locate the pump power cable and

feed it through the top of the post.

Pull the pump power cable out of the

hole under the fountain base then

connect the solar panel.

5. Attach the fountain basin by

twisting it onto the post. Ensure it is

level before proceeding. Place the

washers on the holes of the fountain

basin. Run the cord through the gap of

the pump housing. Align the holes of

the pump housing and the holes of the

fountain basin and washers and

tighten the screws.

v001: 13/08/21