Hideaway Beds Beta Bed Specially-size Инструкция по сборке Руководство - Страница 9
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Внутренняя отделка Hideaway Beds Beta Bed Specially-size. Hideaway Beds Beta Bed Specially-size 20 страниц. Wallbed frame and cabinet system
Печатать страницуMarking the Mounting Holes for the Lift Mechanism
STEP 2: Mount the Lift Mechanism
Note: Mount the Lift Mechanisms prior to assembly of the Bed Cabinet (STEP 4).
1. Exactly mark the mounting holes on the inside of each side panel from the dill pattern in Drawing 3.
2. Drill a 1/16" (2mm) pilot hole for each mounting bolt. Drill the final hole with a 5/16" (8mm) bit.
3. Counter sink 5/8" (15mm) on the outside of the panels just deep enough for the 5/16" x 1 1/4"
(8x32mm) Machine Screws.
NOTE: All location measurements are from the front edge of the Cabinet
Side Panels. Refer to Drawing 3.
Hole C
Hole D
Bottom Rear Base
Numbers in parenthesis ( ) are millimeters.
16.0" (406)
17 7/8"
(454)
11.0"
(279)
Drawing 3. (Drill pattern for SBLM Lift Mechanism)
2 5/16"
11 13/16"
(59)
(300)
17 9/16"
(446)
16 1/8"
(410)
14 7/16"
(367)
Hole A
Hole B
Hole E
FINISHED FRONT
EDGE OF PANEL
Front Bottom of Kick
BOTTOM EDGE OF PANEL
9.