Hideaway Beds Beta-DIY Инструкция по сборке Руководство - Страница 13

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Внутренняя отделка Hideaway Beds Beta-DIY. Hideaway Beds Beta-DIY 20 страниц. Wallbed frame and cabinet system

Печатать страницу

STEP 5: Attach Bed Cabinet Securely to Wall

Hints:

If the room is carpeted you may raise the kick up to 1/4" (7mm) to clear the

carpet. More than 1/4" (7mm) will obstruct the operation of the bed.

You may or may not wish to remove the Base Board to allow the Bed Cabinet to fit

flush against the wall. If you do remove the Base Board, save for later trim and

replacement. If you do not wish to remove the Base Board, you may use a shim or filler

strip of the same thickness at the top between the cabinet and the wall.

Place cabinet against wall. Make sure the cabinet is level and square. Measure diago-

nally to be sure of square. Bed will not operate if cabinet is not square. Check also for

square from front to back as well as side to side. Use shims where necessary.

Prior to placing cabinet against the wall, locate 3 studs or other wall frame members at

the level of the Top Stretcher panel (top of bed).

Alert: The cabinet must be secured to studs or other wall structural members using the

2"x2" (51x51mm) L-Brackets supplied. If the wall is not a wood stud wall,

use metal stud screws, toggle bolts or concrete expansion bolts if necessary.

Now that the cabinet is square and plumb, use two #8 x 2" (M4x51mm) flat head wood

screws in each or three 2"x2" (51x51mm) brackets to attach to studs at the top level of

the Top Panel (see drawing 8). Re-check square and plumb and then secure 2"x2"

(51x51mm) L-Brackets to Top Panel with #8 x 3/4" (M4x19mm) wood screws. Attach

warning label to top of cabinet. Attach three Bumper Buttons to bottom of the front

edge of the Top Facia. These Bumpers allow the Bed Face Panel to close quietly.

Top Facia

Left

Side Panel

2"x2"

(51x51mm)

Warning

Angle

Label

Brackets

Rubber

Bumpers (3)

Wall

Studs

Drawing 8.

Right

Side Panel

13.