2gig Technologies Go!Control Panel Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Панель управления 2gig Technologies Go!Control Panel. 2gig Technologies Go!Control Panel 20 страниц.

Печатать страницу

Go!Control Wireless Security System | User Guide

SENSOR BYPASSING

Before the system can be armed, all

protected doors and windows must be

closed or bypassed. You can bypass open

sensors on protected doors or windows

before arming the system. When a sensor is

bypassed, the system ignores that the door

or window is open. There are two types of

sensor bypasses available:

•

Forced

•

Manual

In some cases (such as when using the

security system for protection when staying

at home) it may be desirable to leave some

sensor‐protected doors or windows open.

Temporarily bypassing a sensor for this use is

called Force Bypassing.

NOTE: Force bypasses are

automatically removed when the

system is disarmed.

Sensor bypassing is also sometimes used

when a sensor is requiring service. A sensor's

magnet might be missing, or an external

switch contact connected to a sensor might

be faulty, causing the sensor to be detected

as open by the Control Panel. In these

conditions, you may need to schedule a

service call with your qualified alarm service

technician to repair or replace the troubled

sensor. If the security system needs to be

armed before the sensor can be serviced,

the sensor can be manually bypassed so the

rest of the system can be armed. Depending

on programming, manual bypasses can

remain in place until they are manually

removed.

NOTE: Bypassed sensors offer no

protection and cannot cause an

alarm. Use bypass if you want to

arm your system with one or more

sensors open and intentionally

unprotected.

Force Bypass All Sensors

If any sensors are open when the system is

disarmed, the Arm button on the panel turns

YELLOW. When you tap the Arm button, the

system automatically reveals the Bypass

screen which lets you arm the system while

forcing it to bypass all open sensors.

To force bypass all open sensors:

Ensure a sensor is open, such as a door

or window.

At the Security or Menu screen, tap the

YELLOW Arm button.

At the Bypass screen, tap Bypass All.

This forces the system to bypass all of

the open sensors in the list, including

any open interior sensors.

At the Enter Code screen, enter a valid

user code to bypass the sensor.

NOTE: The Quick Bypass feature can

also be configured by the installer.

For details, refer to the Control

Panel's Installation &

Programming Guide.

At the Ready to Arm (Sensors Bypassed)

screen, tap Stay or Away mode.

Later, when you disarm the system, the

bypassed sensors are returned to their

normal state.

Bypassing/Un-Bypassing

Sensors

To add or remove sensors on the system's

bypass list:

At the Home screen, tap Menu.

At the Menu screen, tap Toolbox.

Enter a valid user code to gain access to

the Toolbox.

At the Toolbox (1 of 3) screen, tap

Bypassed Sensors.

At the Bypassed Sensors screen, choose

one of these options:

•

Add a sensor to the bypassed list.

Tap the BLUE button that

corresponds to the desired sensor.

When the button turns YELLOW, the

system will bypass the sensor.