ActiveProducts XE06 Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Мойка высокого давления ActiveProducts XE06. ActiveProducts XE06 10 страниц. 1600 psi electric pressure washer
Печатать страницуTROUBLESHOOTING
Symptom
Motor buzzes but fails to run.
No Water
IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT
www.activeproducts.com OR CALL CUSTOMER SERVICE AT 1-866-924-7626 FOR HELP .
Cause
Supply voltage
below minimum.
System has residual pressure.
Voltage loss due to
extension cord.
Pressure washer not used
for long periods.
Residual friction among
components. Unit might
hum.
Water supply is OFF .
Kink in the garden hose.
17
Solution
Verify that only the pres-
sure washer is running on
this circuit.
Turn unit "OFF" , squeeze
trigger on spray wand to
release pressure, then turn
unit "ON" .
Unplug any extension cords
attached and plug the unit
directly into the outlet.
Call the Toll-Free Hotline.
Disconnect water supply
and power ON for 2 to 3
seconds, repeat couple
times or until the motor
starts.
Turn ON water supply.
Remove kink in garden
hose.