Gait up PhysiGait Lab Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Gait up PhysiGait Lab. Gait up PhysiGait Lab 18 страниц. User manual and outcome parameters

Печатать страницу

Do not remove the conf.bin file which contains the configuration information,

otherwise the Physilog® will not be able to record any data. If this happens,

recreate a configuration using the Research ToolKit or contact Gait Up's

support (www.gaitup.com/support). If the sensors still work with firmware

v1.0.4 also do not remove the "slave.txt" file without which the two sensors

will not synchronise any more. For firmware v1.1.0 upwards, a default

configuration based on original configuration is created to compensate the

removal of the conf.bin file and the "slave.txt" file is no longer needed.

4. Analyse the data

The software of the PhysiGait Lab version is stored on a USB key. Its license is linked to

the USB key hardware and therefore it is only possible to start the software from the USB

key. This USB key does not require you to install the software on a computer and allows you

to use the software when plugged to any compatible computer.

To start the analysis, plug the USB key to your computer, either Windows or Mac, and double

click on the software icon in the folder corresponding to your operating system. The software

start screen is shown below.

Click on the "Analyse" button in order to select one or two gait files recorded with Physilog®5.

When selecting two files they must come from the same trial (e.g. synchronous acquisition

of left and right foot). Loading two files at the same time allows to obtain symmetry and

double stance results.

The software outputs a pdf and/or Excel report (depending on the selected options) with

results of 25 gait parameters.

PhysiGait Lab user manual v1.3.1 Date: 29.04.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760