Gait up PhysiGait Live Руководство пользователя и параметры результатов - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя и параметры результатов для Измерительные приборы Gait up PhysiGait Live. Gait up PhysiGait Live 19 страниц.

Печатать страницу

Physilog®5 in the top right corner of the application.

Note: To be able to generate the report, the tablet needs internet connection. Bluetooth 4.0

or higher is required on the mobile device to be able to communicate with Physilog®5.

3.2

Attachment

The PhysiGait Live is delivered with 2 rubber clips as default accessory. Elastic foot straps

can be bought from the web-shop (shop.gaitup.com) if needed, for example to measure

barefoot gait.

To insert the Physilog®5 into the rubber clip, slide the sensor into the clip on one side then

carefully pull the rubber of the opposite side to cover the edge of the Physilog®. The USB

entry of the Physilog® should be oriented in front of the clip opening, so that the sensor can

be charged without removing the clip.

Then fix the sensors on the feet (distal of the ankle joint). For gait measurement the sensor

can be fixed in any orientation on the foot, either in the shoelaces or on the outer side of the

shoe (on the inner side there is a risk of disturbing the gait). The computed gait parameters

will not be influenced by the sensor position. Fix the sensor such that it doesn't move with

respect to the foot/shoe.

3.3

Subject information, selection of options and comments

Upon entering the Gait analysis part of the application, you can select from new or previous

"subjects". This allows to attribute the reports to a subject and to find reports for comparison

more easily. Do not enter the real name of the person but enter a codified subject ID if you

want to guarantee anonymity of the data on the server. You can always modify the subject

information after having entered and saved it by clicking on the pencil symbol below the user

information on the left side of the screen. Before starting the measurement, you have the

possibility to choose between the following options:



To analyse forward gait without extrinsic variations, you can exclude a chosen number

of the first and last cycles and the turns. We recommend discarding two steps for

initiation and termination (Yuancheng J. et al. 1993).



For foot clearance analysis, the shoesize (from heel to tip) needs to be specified in cm.

Make sure to measure this parameter if you are interested in clearance parameters.

PhysiGait user manual v1.3.1 Date: 29.04.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760