Automationdirect.com Productivity 2000 P2-SCM Руководство - Страница 8
Просмотреть онлайн или скачать pdf Руководство для Блок управления Automationdirect.com Productivity 2000 P2-SCM. Automationdirect.com Productivity 2000 P2-SCM 8 страниц. Serial communications
WARNING:
To minimize the risk of potential safety problems, you should follow all
applicable local and national codes that regulate the installation and operation of
your equipment. These codes vary from area to area and it is your responsibility
to determine which codes should be followed, and to verify that the equipment, in-
stallation, and operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to
follow all applicable codes and standards. We do not guarantee the products
described in this publication are suitable for your particular application, nor do
we assume any responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or operation of this equip-
ment, or if you need additional information, please call Technical Support at
770-844-4200.
This publication is based on information that was available at the time it was
printed. At AutomationDirect.com
®
and services, so we reserve the right to make changes to the products and/or
publications at any time without notice and without any obligation. This publication
may also discuss features that may not be available in certain revisions of the
product.
Removable Terminal Block Specs (Port 4)
Number of Positions
4 Screw Terminals, 3.5 mm Pitch
16-28 AWG
Wire Range
Solid/Stranded Conductor
"Use Copper Conductors, 75°C or Equivalent"
Screw Driver Size
TW-SD-VSL-1 (Recommended)
Screw Torque
0.4 N·m
Cable Options
Recommended
L19827-100, Belden #9841 or Equivalent
8
www.productivity2000.com
we constantly strive to improve our products
Caution: If possible, remove field power prior to
proceeding. If not, then EXTREME care MUST be taken
to prevent damage to the module, or even personal injury
due to a short circuit from the live terminal block.
Important Hot-Swap Information
The Productivity2000 System supports hot-swap!
Individual modules can be taken offline, removed, and
replaced while the rest of the system continues con-
trolling your process. Before attempting to use the hot-
swap feature, be sure to read the hot-swap topic in the
programming software's help file or our online documen-
tation at AutomationDirect.com for details on how to plan
your installation for use of this powerful feature.
Tech Support 770-844-4200