Gait up Physilog 5 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Аналитические приборы Gait up Physilog 5. Gait up Physilog 5 12 страниц.
Также для Gait up Physilog 5: Руководство пользователя (17 страниц), Руководство пользователя (17 страниц)

Печатать страницу

Gait up Physilog 5 Руководство пользователя

5. Practical Considerations

5.1 Fixation

The Physilog®5 comes with a rubber clip as default attachment accessory (available from Feb

2017). Additional rubber clips and elastic straps with Velcro patches to stick onto the

Physilog® can be purchased from Gait Up's online shop (shop.gaitup.com).

5.2 Handling / Maintenance

Physilog®5 should be handled carefully. In particular, it should not receive shocks, such as fall,

crushing, being hit etc. Do not press too hard on the on/off button, this can damage the

button.

Warning: Do not use or charge the Physilog® if the sensor or its case is damaged. Contact

Gait Up about what further action is needed when the case is damaged. In case the battery is

damaged immediately move the device away from flammable materials and contact Gait

Up's customer support.

- To benefit from the maximal battery life, fully charge Physilog® sensors before doing

measurements (LED shines green when connected to computer or charger, you can also

check with the app or RTK).

- Copy trial recordings to your computer: Physilog® is not the best place to keep and save

important data.

- Physilog®5 can be used outside. It has the IP67 label, which means that it is waterproof up

to a depth of 1 meter for 30 minutes. Do not use Physilog®5 to measure water-sport activities

without additional waterproofing.

- Storage: Store in a cool (0°C 30°C) and dry place. The provided box is the perfect place for

your sensor.

- Cleaning: Sensors can be cleaned gently using alcohol wipes. Before you clean the device

make sure it is turned off and disconnect all cables. Alcohol used in excess may damage the

sensors waterproofing. Make sure to use wipes and not put liquid alcohol directly on the

sensor.

- Sensors do not need yearly recalibration.

- Do not throw Physilog® sensors in the normal trash, dispose of it properly considering local

laws and rules about electronic waste and batteries.

- Make sure to know which Physilog® file corresponds to which trial for your analysis Last

digits of file name are automatically incremented (exceeding 999 and firmware update