Automationdirect.com Productivity 2000 P2-01DCAC Руководство

Просмотреть онлайн или скачать pdf Руководство для Источник питания Automationdirect.com Productivity 2000 P2-01DCAC. Automationdirect.com Productivity 2000 P2-01DCAC 4 страницы.

Печатать страницу

WARNING:

To minimize the risk of potential safety problems, you should

follow all applicable local and national codes that regulate the installation

and operation of your equipment. These codes vary from area to area and

it is your responsibility to determine which codes should be followed, and to

verify that the equipment, installation, and operation are in compliance with

the latest revision of these codes.

Equipment damage or serious injury to personnel can result from the

failure to follow all applicable codes and standards. We do not guarantee

the products described in this publication are suitable for your particular

application, nor do we assume any responsibility for your product design,

installation, or operation.

If you have any questions concerning the installation or operation of this

equipment, or if you need additional information, please call Technical

Support at 770-844-4200.

This publication is based on information that was available at the time it

was printed. At AutomationDirect.com

our products and services, so we reserve the right to make changes to

the products and/or publications at any time without notice and without

any obligation. This publication may also discuss features that may not be

available in certain revisions of the product.

Terminal Block Specifications

Number of positions

4 screw terminals

22-12 AWG (0.324 to 3.31 mm²)

Solid / Stranded conductor

Wire Range

3/64 in (1.2 mm) insulation maximum

Use copper conductors, 75°C or equivalent

Screw Driver Width

1/4 in (6.5 mm) maximum

Screw Size

Screw Torque

7-9 lb·in (0.882 - 1.02 N·m)

Sales 800-633-0405

we constantly strive to improve

2000

P2-01DCAC Power Supply

The P2-01DCAC Power Supply provides

isolated power to the

Productivity2000 base from an external

12-24VDC or 24VAC source.

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Terminal Block Specifications . . . . . . . . . . . . . . . . . 1

Power Supply Installation Procedure . . . . . . . . . . . 2

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General Specifications . . . . . . . . . . . . . . . . . . . . . . 3

User Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hot Swap Information . . . . . . . . . . . . . . . . . . . . . . . 3

Warranty: Thirty-day money-back guarantee. Two-year limited

replacement. (See www.productivity2000.com for details).