ADEMCO VISTA-20SE Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Панель управления ADEMCO VISTA-20SE. ADEMCO VISTA-20SE 4 страницы. 2-partitioned security system
Также для ADEMCO VISTA-20SE: Форма программирования (8 страниц), Руководство пользователя (9 страниц), Форма программирования (8 страниц)

5. Installing New Battery

Place the new battery inside the control panel box.

1. If the replacement battery has plastic terminal protectors, remove them before connecting the wires to the

battery.

2. Connect the red wire to the red or (+) terminal of the new battery by pushing the connector firmly onto the

terminal.

3. Connect the black wire to the black or (-) terminal of the new battery by pushing the connector firmly onto

the terminal.

6. Check for Low Battery Signal

Go to your alarm keypad and see if it still displays a BAT or SYSTEM LO BAT message. If the message is still displayed, the

new battery may need to recharge for a short time. If the warning message still displays 48 hours after the new battery

is installed, please call Customer Care at 800.238.2727.

7. Test Your System

Once the alarm keypad no longer displays the BAT or SYSTEM LO BAT message, test the security system to make sure

that it is working properly by placing it on test and triggering an alert (by opening a monitored door or window, for

example).

8. Secure the Control Panel Box

Close the control panel door by replacing the screws or locking the door.

9. Take System Off Test

Remove the system from test.

10. Recycle Old Battery

Dispose of your old battery appropriately. To find a recycler in your area, visit www.call2recycle.org/locator. Returning a

lead-acid battery to a recycler listed on this site is free of charge and will ensure that it is being recycled according to all

applicable regulatory requirements.

For more information on what ADT is doing to improve sustainability and reduce our environmental impact, please visit

the corporate citizenship page at www.adt.com/about-adt/responsibility.

Battery Safety Tips

1. Proper Handling

Due to the potential energy stored in a sealed lead-acid battery, improper handling or use of the batteries or failure to

observe the precautions listed here may result in bodily injury caused by electrolyte leakage, heat generation, or

explosion.