Hidrotermal Hidro-ST60 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Железо Hidrotermal Hidro-ST60. Hidrotermal Hidro-ST60 12 страниц.

2)-Power Connection

ATTENTION:

The place for installation of the steam generator should match following conditions:

A. Position the steam generator so that the piping connections, controller, cables are convenient and

accessible for operations and service

B. The steam generator could not be frozen or moistened, and the temperature should not exceed 40 ℃

（Never install the generator inside the steam bathroom or outdoors.)

C. The length of steam pipe from steamer bathroom to generator should be less than 6m. The steam pipe

shall slope to the steam bathroom and higher than the position of the steam head, so that condensation could

drain into the steam room and will not gather in the tube. Furthermore, the steam pipe should be insulated

properly.

D. Install the steam head complying with the instructions. The user shall not touch the steam head.

E. The water drainage channel must be opened when installing the steam generator.

ATTENTION:

Wire connection option for 4-10KW steam generator, connect the conventional power supply (AC380V/3N or

AC220V/1N) to 2*110V/1N, so must match this condition:

The voltage tolerance between two Live wire is 220V!

AC380V/3N to

2*110V/1N

AC220V/1N to

2*110V/1N