Dynamic Projection MH10 Руководство по быстрой установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Аксессуары для проекторов Dynamic Projection MH10. Dynamic Projection MH10 10 страниц. Mirror head

Печатать страницу

Dynamic Projection MH10 Руководство по быстрой установке

Mirror Head Quick Installation Guide

For the full manual please visit

Technical specifications

• High resolution 16bit Pan / Tilt mirror movement

• DMX-512 control over 14 DMX channels

• DMX-IN and DMX-OUT / Through port (5-pin male and female XLR connectors)

• At least 5 channels are required to control the unit

• Art-Net™ connection (RJ45) (Art-Net™ designed by and Copyright Artistic License Holdings Ltd.)

• HTTP Control protocol

• High resolution micro step motors with maintenance free direct drive

• Self calibrating mirror position for high accuracy

• Absolute reposition accuracy smaller than 0.03°

• Movement accuracy: Pan and Tilt from the same direction to the programmed point within approximately 0.01°

• RS232 remote control connection for projector (D-sub 9 male) - cable included

• Flash-able firmware (Mini USB OTG)

• Ambient Light LED with high power 3 Colour LEDs (18Watt total).

• LED-Display for easy configuration

• Coated mirror for optimum reflection ~98% refraction factor

• Optimized mirror optics for the specific projector

• Passive cooled system, fanless (excluding projector)

• Environmental tolerances: Ambient operating temperature range: 5° – 35°C, Humidity: 20% – 80% (non-condensing)

• Mounting plate optimized for specific projector mounting.

• High durability black powder-coating surface finishing.

• DPCC web interface for easy show creation

• Package includes: RS232 cable, AC-loop through cable, Quick installation guide.

Examples of mounting and positioning the Mirror Head

„mirror up"

"floorstand up"

https://www.dynamicprojection.com/mh-support/

„mirror down"

"floorstand down"

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

~40°

Extended Mode

The illustrations show the approximate usable angular range of the projection cone

depending on the operation modes. The shown ranges may differ depending on the

lens-shift and blocking parts of the projector or mounting constructions. The modes

can be set in the firmware of the Mirror Head using the „System" menu.

Default Mode („90 Degrees"), this is the „90° Tilt" mode available on all Mirror Head

models.

TILT Extended Mode („162 Degrees") This mode adds more projection range to the

Mirror Head. Warning: Do not use the Extended Mode if your model does not support

it – if unsure ask the support.

~80°

Extended Mode

~115°

Default Mode

~110°

Extended Mode

~180°

Default Mode

QIG - Version 2.8