Celexon Professional Plus Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Белая доска Celexon Professional Plus. Celexon Professional Plus 8 страниц. Screen
Также для Celexon Professional Plus: Руководство по установке (13 страниц), Руководство по эксплуатации (6 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (11 страниц)

Safety instructions

Please read the following instructions carefully and keep them for later use. The

manufacturer assumes no responsibility for damage to property or personal

injury when the screen is used outside the recommended specifications, or in case

of improper installation.

Do not use this screen near heaters or air conditioners. Also, do not mount the

product in direct sunlight or in front of a window. Due to the temperature-sensi-

tive PVC surface, it can lead to lasting damage to the projection screen. We recom-

mend that you wait approx. 2 hours after delivery for the installation to allow the

fabric to acclimatize; especially when the screen is brought from cold to warm sur-

roundings. Please avoid any stains on the cloth surface as these could possibly not

be removed. The positions of the endpoints are already set optimally at the fac-

tory and should not be changed. Especially with motor screens, the entire length

of the fabric should always be used to ensure the best flatness. An adjustment of

a few cm of the end stop points should only be made by persons with specialist

knowledge and in consultation with the manufacturer. An incorrect setting may

damage the screen.

Care Instructions

NEVER clean the screen with alcohol or other detergents that contain solvents. Use

only a soft and clean cloth with a mild soapy water, if necessary. Be sure to avoid

contact with sharp objects as these could permanently damage the projection

screen fabric. Further information can be found in the enclosed screen information.

Voltage:

100V~120V, 60Hz or

220V~240V, 50Hz

Consumption:

30W (MAX)

Integrated Battery: DC 10.8V, 2600mAh

Power Supply: DC 12,6V, 1A