Dynamite DYN1922 Руководство по эксплуатации
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Зарядное устройство Dynamite DYN1922. Dynamite DYN1922 2 страницы. Ni-mh glow driver and charger
Печатать страницу
Ni-MH Glow Driver and Charger
Instruction Manual | Bedienungsanleitung | Manuel d'utilisation | Manuale di Istruzioni
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or
towerhobbies.com and click on the support or resources tab for this product.
MEANING OF SPECIAL LANGUAGE
The following terms are used throughout the product literature to indicate various levels of
potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property
damage, collateral damage, and serious injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property
damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property
damage AND a little or no possibility of injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features
of the product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this Product in a safe and responsible
manner could result in injury or damage to the product or other property. This product is not
intended for use by children without direct adult supervision. Do not use with incompatible
components or alter this product in any way outside of the instructions provided by Horizon
Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is
essential to read and follow all the instructions and warnings in the manual, prior to assembly,
setup or use, in order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
SAFETY PRECAUTIONS AND WARNINGS
WARNING: Failure to exercise caution while using this product and comply with the
following warnings could result in product malfunction, electrical issues, excessive
heat, FIRE, and ultimately injury and property damage.
• Read all safety precautions and literature prior to use of this product
• Never allow minors to charge battery packs
• Never drop charger or batteries
• Never attempt to charge damaged batteries
• Never attempt to charge a battery pack containing different types of batteries
• Never charge a battery if the cable has been pinched or shorted
• Never allow batteries or battery packs to come into contact with moisture at any time
• Never charge batteries in extremely hot or cold places (recommended between 50–80°F or
10–27°C) or place in direct sunlight
• Always disconnect the battery after charging, and let the charger cool between charges
• Always inspect a new battery before charging
• Always terminate all processes and contact Horizon Hobby if the product malfunctions
• Always keep batteries and charger away from any material that could be affected by heat
(such as ceramic and tile), as they can get hot
• Always end the charging process if the charger or battery becomes hot to the touch or starts
to change form (swell) during the charge process
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to national regulations.
NOTICE
Scan the QR code and select the Manuals & Support quick link
from the product page for the most up-to-date information.
SPECIFICATIONS
Glow Driver
Sub C 2600mAh Ni-MH battery cell
Short-circuit protection
Charge status LED
Ni-MH Charger
AC Input Voltage 100–240V AC (50–60Hz)
Charge Current 250mAh
Operating Temperature 0º C to + 50º C
Charging Mode Ni-MH
GLOW DRIVER BATTERY INSTRUCTIONS
Turn the meter cap counterclockwise to remove and replace the battery.
OPERATING INSTRUCTIONS
Operating your optional Charger with the Glow Driver
1. Attach the AC charger to the AC wall outlet. Make sure the plug is fully seated in the socket.
CAUTION: Always connect the charger to AC power before connecting a Glow Driver
to the charger, or damage to the charger and the battery can result.
2. Correctly connect the output end of the charger to the igniter end of the glow driver.
3. The light of the red LED on the charger indicates that the unit is charging.
4. After charging is complete, disconnect the charger from the AC power outlet then disconnect
the Glow Driver from the charger.
ESTIMATED CHARGE TIME
The charger can charge (at a 250mAh charge rate) the included Ni-MH battery (2600mAh) of
the glow igniter in approximately 10 hours if the battery is fully discharged. Initial charging will
take about 8.5 hours and recharging will require slightly less time, depending on the amount
the battery is discharged.
HEATING A GLOW PLUG
Connect the glow driver to a glow plug by depressing the spring loaded plunger, then releasing
the plunger when the end of the driver is on the glow plug's hexagonal body.
When the meter pointer points to the green, the glow igniter is operating normally and the glow
plug is passing current.
When the meter pointer points to the red, the glow driver's battery may be low and require
charging. If the battery is fully charged, the glow driver may be faulty or the glow plug has
failed. Replace faulty parts when needed.
We recommend always putting an insulating cap on the end of your driver during storage
to prevent accidental shorting or battery discharge through the electrical connection.
(DYN1922)
MULTI-PURPOSE
NI-MH