galant 6160EX Инструкции пользователя - Страница 15

Просмотреть онлайн или скачать pdf Инструкции пользователя для Клавиатура galant 6160EX. galant 6160EX 18 страниц.

Testing the System

A test function is available which allows a user to manually test the

sensors and alarm sounders on the system. This test is carried out as

follows:

From normal Day mode;

Type in the user code.

Press 5 (Test)

The system will ring the outside bells for 5 seconds and switch on

the strobe light. The strobe light will stay on for the duration of the

test.

When the bells switch off the system enters walk test mode to

allow testing of the sensors.

Activate each detector in turn. As each detector is activated, the

keypads will beep twice and the zone number will be shown on the

display. When several detectors have been activated, the display

will scroll through all the activated zone numbers.

After activating all the detectors, check to make sure all the

corresponding zone numbers are displayed.

To end the test, type in the user code again. The strobe light will

switch off.

Note: The Test mode will not operate if there is a fault condition

present.