Dynamite Passport Ultra 220W Руководство по установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке для Зарядное устройство Dynamite Passport Ultra 220W. Dynamite Passport Ultra 220W 10 страниц. 100w lcd ac/dc multi-chemistry battery charger
Печатать страницу
3 - LIThIUM DISChArgINg
1. Connect the banana plugs of the battery adapter cable to the Power Output Black (–) and
Power Output Red (+), making sure that the positive and negative connectors are not reversed.
2. Connect the JST_XH balance adapter to the Balance Circuit Adapter Board Connector.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the JST_XH balance adapter.
5. Press the Left and Right Arrows on the LCD Touch Screen to scroll through the main menu
screens until you reach Program Select=Li-Po/Li-Ion/Li-Fe.
Program select=LiPo
CHG
6. Press DCHG.
LiPo DISCHARGE
Pack.Volt.
Capacity
Current
End Cell Volt
Press&Hold
BACK
7. Press a parameter to highlight that parameter.
8. Press the Up and Down Arrows to edit the parameter.
9. Press Select to save the parameter.
10. Once the parameters are at the desired settings, press and hold DISCHRG.
11. The charger will check the battery and charger settings and discharging will begin. The
charger will beep and display the following screen:
LiPo DCHG
Capacity
Current
Voltage
Resistance
Peak Temp.
12. Press the arrow in the top right of the LCD Touch Screen to see the rest of the Discharging
information.
13. Press Unit to see the voltages for each cell. Press Back to return to the discharging screen.
DATA LiPo–CELLS
1 > 3.97
2 > 3.98
3 > 0.00
4 > 0.00
5 > 0.00
6 > 0.00
14. Press Graph to see the battery voltage graph. Press Back to return to the discharging screen.
Data LiPo = Graph
15. Press STOP at any time to stop discharging.
16. When discharging is complete, the charger will sound a series of beeps and display the
following screen:
LiPo DONE
Capacity
Current
Voltage
Resistance
Peak Temp.
17. Disconnect the battery from the charger.
4
LiPo
DCHG
STOR
:
7.4V/2S
:
2250mAh
:
0.5A
:
3.49V
:
DISCHRG
SELECT
000:30S
:
13mAh
:
1.4A
:
7.91V
:
****mΩ
:
No sens
BACK
BACK
010:28S
:
169mAh
:
0.0A
:
8.00V
:
****mΩ
:
No sens
4 - LIThIUM STOrAgE ChArgINg
1. Connect the banana plugs of the battery adapter cable to the Power Output Black (–) and
Power Output Red (+), making sure that the positive and negative connectors are not reversed.
2. Connect the JST_XH balance adapter to the Balance Circuit Adapter Board Connector.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the JST_XH balance adapter.
5. Press the Left and Right Arrows on the LCD Touch Screen to scroll through the main menu
screens until you reach Program Select=Li-Po/Li-Ion/Li-Fe.
Program select=LiPo
CHG
6. Press STOR.
LiPo STORAGE
Pack.Volt.
Capacity
Current
End Cell Volt
Press&Hold
BACK
7. Press a parameter to highlight that parameter.
8. Press the Up and Down Arrows to edit the parameter.
9. Press Select to save the parameter.
10. Once the parameters are at the desired settings, press and hold STORE.
11. The charger will check the battery and charger settings and storage charging will begin. The
charger will beep and display the following screen:
LiPo STORE
Capacity
Current
Voltage
Resistance
Peak Temp.
12. Press the arrow in the top right of the LCD Touch Screen to see the rest of the storage
Charging information.
13. Press Unit to see the voltages for each cell. Press Back to return to the storage charging screen.
DATA LiPo–CELLS
1 > 3.97
2 > 3.98
3 > 0.00
4 > 0.00
5 > 0.00
6 > 0.00
14. Press Graph to see the battery voltage graph. Press Back to return to the storage charging screen.
Data LiPo = Graph
15. Press STOP at any time to stop charging.
16. When charging is complete, the charger will sound a series of beeps and display the following
screen:
LiPo DONE
Capacity
Current
Voltage
Resistance
Peak Temp.
17. Disconnect the battery from the charger.
LiPo
DCHG
STOR
:
3.7V/1S
:
50mAh
:
0.1A
:
3.70V
:
STORE
SELECT
000:11S
:
4mAh
:
1.8A
:
7.87V
:
****mΩ
:
No sens
BACK
BACK
010:28S
:
169mAh
:
0.0A
:
8.00V
:
****mΩ
:
No sens