8STREME 7310 Руководство - Страница 11

Просмотреть онлайн или скачать pdf Руководство для Пылесос для плавательных бассейнов 8STREME 7310. 8STREME 7310 18 страниц. New square swivel
Также для 8STREME 7310: Руководство (16 страниц), Руководство (3 страниц)

Печатать страницу

1. Troubleshooting

Page 11

08 Indicator lights / LED

INDICATOR

LIGHT / LED

MEANING / DIAGNOS IS

When the power supply is plugged into wall outlet and

toggle switch is pressed towards "ON", this blue light must

remain on to indicate that the power supply is operating

normally. Otherwise check if the wall outlet has power or

replace the transformer.

It is a timer indicator. This red light will light up during the 2

hour cleaning cycle.

This blue light turns on when the floating cord between the

transformer and the No-Twist float with swivel union is

properly connected and you have turned on the robot. It

indicates that the current is reaching the float. If the light

does not come on, check the connections .

This green light only lights up when the robot pump is

running. This green light does not light up when the pool

robot has completed its cleaning cycle or during certain

phases of the device's operation (e. g. after climbing walls,

when pump stops and the robot sinks).

When the "No-Twist" float with rotating swivel is connected

to the transformer and you have started the robot, this small

red light indicates that the current is coming out of the float.

You must have both this red light and the blue light (C) on

the float. If you have the blue light on the float but not the

red light, then it is likely that you will need to replace the

float.