Galanz RFFK003B Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Холодильник Galanz RFFK003B. Galanz RFFK003B 6 страниц.

Печатать страницу

DEFROST

Heavy frost will influence the refrigerating of the appliance and increase the

energy consumption. Defrosting is therefore needed as the frost can reach a

thickness of 5mm.

For manual defrost: take all the food out of the compartments; remove the

drawers and shelves; unplug the electronic power cord;

Open the doors and wait for the thaw; wipe up water with a dry cloth.

Do not use any additional mechanical or electrical methods

to accelerate the defrosting process

DISCONNECTING THE APPLIANCE

After a power failure, even during the summer, the refrigerator can store food

normally for several hours.

1. Discontinuation during power failure. After power failure, do not put additional

food in the appliance and reduce the frequency of door openings. Put several

ice cubes in a container and place in the top of the fridge if the power failure

was anticipated.

2. Discontinuation during vacation. If the appliance is being left for a short

period, please consider any foods that may go off during this period and

dispose of accordingly. Ensure the doors are tightly closed before leaving. If

the appliance is being left for an extended period, please remove all food and

turn off the power. Once defrosted please clean up the liner, wipe dry and

leave the door open until return.

3. Stop using

If the refrigerator is not going to be used for a long time, please unplug,

cleanup, and leave the door open to get rid of unpleasant odours.

Please minimize powering down the appliance as this can affect

the product life. After unplugging the power, please leave at least

Attention

5 minutes beforere connecting.

USER NOTIFICATIONS

1. Do not splash water on the refrigerator, as it will cause oxidation and

malfunction. Electronic component such as the on/off button should be wiped dry.

2. The following cleaning agents should not be used as they may damage the

painted cover and plastic: Soap powder, abrasive cleaning powder, alkali

cleansers, chemical cloth, thinner, alcohol, acid, petroleum products, hot water.

3. Any spillages, splashes or smears on the internal plastic components can

cause damage if not wiped clean.

4. Please check the points below after maintenance:

(1) Is there any damage or loss of the electronic wire?

(2) Can the plug be put into the socket reliably and smoothly?

(3 ) Is the plug heating abnormally?

Please remove the door gaskets before disposing of this

Warning

appliance. Disposal must be carried out in line with local authority

requirements.

TROUBLESHOOTING TIPS

During normal use, please do not interrupt the power as this could affect the life

of the appliance. If the units do need to be turned off, please allow at least 5

minutes before turning back on

1. The refrigerator does not work

It may not be connected to the power supply (plug, power cut or fuse); Voltage is

too low.

2. The refrigerator does not work efficiently as expected It maybe caused by

heavy frost, a warm temperature setting, or frequent door operation.

3. It makes unusual noise It may be caused by an imbalance or loose location

of the appliance, or by resonation between the appliance and other objects.

4. The compress or keeps working for a long period. The location environment

maybe too hot. The doors maybe opened too frequently

or left open. The temperature control knob set (4-7) may increase the working

time of the compressor.

5. Foul odour present

Food with strong odours should be packed tightly before being put inside the

appliance.

6. Water leaks from the bottom of the refrigerator. The drain tube is jammed.

Please use a proper tool to unblock it.

7. Heavy frost occurs on the rear of the appliance. Putting humidor hot food

into the appliance may cause this problem. Or it maybe caused by high humidity.