GALAXIS SHOWTECHNIK PYROTEC PFE Profi Midi 1 Output Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Приемник GALAXIS SHOWTECHNIK PYROTEC PFE Profi Midi 1 Output. GALAXIS SHOWTECHNIK PYROTEC PFE Profi Midi 1 Output 19 страниц.
Печатать страницу5
10. We recommend to have our products inspected every one to two years.
Along with the testing of the rechargeable battery, a visual test as well
as a functional test will prove that the operational safety standards are
still met.
11. Do not use damaged equipment. If a damage is found, immediately send
the device back to the manufacturer for professional repair. Our warranty
for the proper function for our equipment is only for components of our
system, which have no damage.
12. Any changes in the devices or to the firing system as well as repair
work on the units other than that through the manufacturer will invalidate
any warranty claims and our product liability will be void. Should repair
of the units be necessary, then we do require a detailed report of the
problem.
13. Please make sure when lending or renting out the equipment, that no
damage has occurred during the rental period of the units. Advise your
staff, that it is very important to report any possible damage of the units
immediately. Customers, which have borrowed or rented the equipment are
hereby informed, that it is their duty to report any damage found or
suspected on the unit when returning such.
14. Wire connections from the firing device to the e-matches are always to
be insulated. At the same time avoid wire damage, for example through heat,
cable twisting, cable pinching and burn-off cinders or through forced
piercing. All cables must be checked before each use on it's faultless
construction. When using used wires we do recommend a continuity and short
circuit test between each insulated connection before using it again.
15. The firing of igniters in accordance with 'SprengG' (i.e. German
explosives law) is not allowed with our products. For this purpose only
firing units with a BAM certification in accordance with §5 'SprengG' or
equivalent are allowed. The same applies to high explosives.
16. Avoid unintended firing through electrostatic charging. When using e-
matches, make sure that you only use those types, which are protected
against unintended firing through electrostatic discharges. The e-matches
you use should also have a BAM certification or equivalent.
17. Avoid possible or even physical contact of the e-matches or their
firing lines with other conductible materials if the possibility is given
that either a static discharge or potential equalization can arise.
18. Make sure that no unintended firing possibilities are given. Commonly
caused either through strong electrical, magnetic, electromagnetical fields
as well as other voltage sources.
19. An often underestimated risk are unintended firings due to live
contacts found as charging contacts on mobile phones, walkie talkies as
well as rechargeable battery driven tools. Even when due care and attention
is taken, a battery pack or similar can be a hazard when dropped especially
when live contacts are revealed.
20. Unintended firing can be caused by thunderstorms or the electrostatic
fields during the drawing up of a thunderstorm. We recommend clearing and
securing the area in question.
21. Another possible danger for unintended firings are potential
equalization currents. Be aware that these currents may occur in between
conductive building segments themselves or between these conductive
segments and earth potential. Neither e-matches nor wiring should come in
contact with such segments.