Dynapac BG70 Инструкция по эксплуатации и каталог запасных частей - Страница 4

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации и каталог запасных частей для Электроинструмент Dynapac BG70. Dynapac BG70 7 страниц. Concrete equipment power floats

GENERAL
The DYNAPAC ride on double floats BG70 is designed for large surfaces trowelling.
Working width 1830mm 72" feature two four blades rotors.
DESIGN
BG70 is driven by a twin cylinder four strokes petrol engine (1).
It is equipped with a safety switch which stops the engine if the operator leaves the seat (2).
The engine power is transmitted to the rotors supporting the blades (3) through a centrifugal clutch, two V belts, a
drive shaft and two reduction gear boxes (4).
The blades are protected by a guard ring (5).
Blade speed can be smoothly adjusted from 70 to 160 rpm by the throttle pedal (6).
Three powerful halogen lights (7) permit precision finishing in poorly lit conditions.
Blade pitch control (8) carried out manually allows adjustment of blades pitch.
Two adjustable control levers (9) accurately and easily steer the BG double float.
The retardant spray system (10) allows operator to apply a fine spray of retardant on the slab during the finishing
operation. The retardant is stored in a tank mounted on the rear of the machine. The spray system is activated when
a button on the left control lever (9) is pressed.
It is equipped with an electric start supplied with a battery (11).
2
5
3
12
10
7
14
15
1
8
2. Seat
9
3. Blades
5. Guard ring
6. Throttle pedal
7. Halogen light
8. Control levers
9. Blade pitch control
6
1. Petrol engine
11
4. Reduction gear box
10. Spray system
11. Battery
12. Fuel tank
13. Hour meter / tachometer
13
14. Ignition switch key
15. Lights switch
4
4