Galaxy Audio ANY SPOT DHTRQUAD Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Микрофонная система Galaxy Audio ANY SPOT DHTRQUAD. Galaxy Audio ANY SPOT DHTRQUAD 16 страниц. Uhf four channel diversity wireless receiver

Печатать страницу

Setting up multiple receivers

ANY SPOT

DHTRQUAD

UHF Four Channel

Diversity Wireless Receiver

POWER

1) Power on any pre-existing wireless systems and transmitters except the first DHT system.

2) Power on the first DHT Receiver.

3) The Control and set buttons are on the front of the receiver.

4) Press the set button until the group number flashes on the LCD screen

5) Press the up/down buttons to select group 1.

6Press the set button twice to get to the scan mode.

7) Press the up or down button. The unit will now go into scan mode. You will probably see the RF

meters light up if the scan sees other transmitters.

8) When it stops scanning, it will stop on the clearest frequency, and will be flashing the frequency

on the LCD screen.

9) Press the set button and it will set itself to that frequency. Do not wait to press the set button as

the DHT Receiver will revert back to the original frequency, and the process will need to be restarted

10) If the unit cannot find a good frequency within group 1, start the process again scanning

group 2, if that is also not clear try group 3, and so on till you get a good frequency.

When the DHT Receiver has been set to a clear frequency, use the ASC feature to sync the

receiver frequency to the transmitter.

11) Turn the transmitter on, aim the red infrared window on the transmitter towards the one on

the receiver and press the ASC button on the front of the receiver. The transmitter will sync to

the receivers frequency.

If you have more DHT systems to tune follow the same procedure on each one, always leaving

the previous system transmitter on.

SYNC