Galaxy Audio ANY SPOT DHTRQUAD Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Микрофонная система Galaxy Audio ANY SPOT DHTRQUAD. Galaxy Audio ANY SPOT DHTRQUAD 16 страниц. Uhf four channel diversity wireless receiver

Galaxy Audio ANY SPOT DHTRQUAD Руководство пользователя
System
Frequency Range: CODE D 584~607 MHz
CODE L 655~679 MHz
Transmitter Output level: 10 dBm
Band: UHF
Operating Range Under Typical
Conditions: 300'
Note: actual range depends on RF signal
absorption, reflection, interference, and
battery characteristics.
Audio Frequency Response (+/-3dB):
60Hz~16kHz
Total Harmonic Distortion (+/-30kHz deviation,
1KHz tone): <1%
Dynamic Range: >90dB A-weighted
Operating Temperature Range:
14ºF to 122ºF (-10º C to +50º C)
Bodypack Transmitter:
Max Audio Input Level:
0 dBV maximum at mic gain position.
+10 dBV maximum at 0 dB gain position.
+20 dBV maximum at 10 dB gain position.
Gain Adjustment Range: 30dB
Input Impedance: 470k
Dimensions: 3.5" x 2.6" x 1"
(89mm H x 65mm W x 24mm D)
Weight: 3.0oz (85 g) (without batteries)
Power Requirements:
2 "AA"
Batteries
alkaline or rechargeable
batteries
Battery Life:
About 6 hours
Handheld Transmitter:
Max Audio input level: 0dBV
Dimensions: 9.5" x 2.1" dia.
(242mm x 54mm dia.)
Weight: 10.6oz (300 g) (without batteries)
Power Requirements: 2 "AA" size
alkaline or rechargeable batteries
Battery Life: About 6 hours
Shockmount Transmitter:
Number of Channels: 16
Number of Simultaneous Systems:
4-8 across multiple bands
Carrier Frequency Bandwidth: Code D 584-607 MHz
Operating Range : 150'
Number of Inputs: 1
Type of Connections: XLRF
Indicators: Low battery LED
Frequency Response: 60Hz~16kHz
SNR: 102dB (a)
THD+N: <1%
RF Power: 10 mW
Phantom Power: 4VDC
Power Requirements: 2 "AA" size
alkaline or rechargeable batteries
Power Consumption: 110mA
Weight: 1.55 lbs (without batteries)
Receiver:
Audio Output Level (+/-30kHz deviation,
1kHz tone): XLR connector (into 600 load) -12dBV
¼" connector (into 3k load) -18dBV
Output Impedance: XLR connector 200
¼" connector 1k
XLR output: Impedance balanced
Pin1:Ground (cable shield)
Pin2:Audio
Pin3:No Audio
Sensitivity: -93dBm for 30dB
Image Rejection: >90dB
Dimensions: 1.7" x 8.3" x 6.3"
(44mm H x 212mm W x 160mm D)
Weight: 31.75oz (900 g)
Power Requirements:
12-18 V dc at 1000mA, supplied by external
power supply.

Specifications

Specifications
Code L 655-679 MHz
11