DYNAPAR SLIM Tach SL85 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медиаконвертер DYNAPAR SLIM Tach SL85. DYNAPAR SLIM Tach SL85 14 страниц. Magnetoresistive encoder, designed for use in 0.625" to 3.000" 16mm to 76mm, shaft diameters

Печатать страницу

1.1 General

These instructions do not claim to cover all details of variation in equipment or to provide for every possible contingency or

hazard to be met in connection with installation, operation, and service. Should further information be desired or should

particular problems arise which are not covered sufficiently for the purchaser's purposes, please contact Dynapar, or one of

its designated representatives.

1.2 Description

The NorthStar SLIM Tach

designed for fast, easy mounting onto a standard NEMA 8.5 inch motor face. The basic design philosophy follows. The

encoder frame is mounted onto the C-Face flange of a motor. This positions the sensor and contains the electronics. The

magnetic pulse wheel on the motor shaft has magnetic pulses imprinted on its outside surface. As the motor spins, the

passing magnetic pulses actuate the magnetoresistive sensor. The resulting electronic signals are processed into square wave

signals by the internal electronics.

Pulse Wheel:

S850512 ?? SW

S850512Z ?? SW

S8501024 ?? SW

S8501024Z ?? SW

0.625" = J04

Clamp

0.875" = J05

Style

0.9375" = J21

1.000" = J06

1.125" = J07

1.250" = J08

0.9375" = J22

1.375" = J09

1.500" = J10

1.625" = J11

1.750" = J12

Set

1.875" = J13

Screw

2.000" = J14

Style

2.125" = J15

2.250" = J16

2.375" = J17

2.500" = J18

2.625" = J20

2.875" = J19

3.000" = J23

Thru Shaft Size

Figure 1: SLIM Tach

NOTE: If you have further questions, please call Dynapar customer service (614) 818-1150+ext. 282 or 278 with serial number ready.

NorthStar SLIM Tach

SL85 is a modular digital encoder. This magnetoresistive encoder sensor-based unit was

Optional Tower

½" – 13 UNC

Socket Head Screws

SL85 Thru-Shaft Exploded View w/ Spare Parts (Shown w/ Optional Tower)

DYNAPAR

SL85 Instruction Manual

Standard Cover:

Pie Pan Cover:

Through-Hole Cover:

Connector Hood:

Slim-C01

Enclosure:

S850512SCCNSE

S8501024DCECSE

S85-COVER-ST

S85-COVER-PP

S85-COVER-TH

+1.800.873.8731