DC Matic TL-900 Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Ударный драйвер DC Matic TL-900. DC Matic TL-900 5 страниц. 24-30 vdc powered 3/4 inch drive impact wrench system
Печатать страницуFig. 5
Properly Controlling Output Impacting Torque
DC-Matic Enterprises, Inc. markets (4) individual 3/4 inch drive "torque limiting
extensions" calibrated at 175, 250, 350 and 475 foot pounds. When attached to the
Model TL-900
a burst of (2) seconds of tool run time will yield an output (impacting
torque) limited within the range (plus or minus 10 %) that is marked on the extension. It
must be noted that a longer than (2) second burst will yield a greater amount of
impacting torque.
Fig. 6
Excluding the do-it-yourself replacement of motor
brushes, please
WARNING
DO NOT
attempt to repair your
Doing so will void the tool's WARRANTY.
www.dcmatic.com
Stabilizing Handle Placement
By removing the (4) allen-head cap screws
that secure the hammer assembly to the
tool, the stabilizing handle can be moved
to the other side as shown.
475 Foot Pound
Torque Limiting Extension
5
Model TL-900.