Dynaric MUL-320 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Упаковочное оборудование Dynaric MUL-320. Dynaric MUL-320 3 страницы. Tensioner for polyerster and polpropylene plastic strap
Печатать страницу3. Apply tension by ratcheting Tension Handle 04 as shown on Fig. 4.
4. Once satisfactory tension is achieved the strap is ready to be sealed. With the Seal 103 securely in
place use the appropriate Sealer 104 to snap the Seal 103. Place the Jaws 105 of the sealer on the
middle of the Seal 103 and press the Handles 106 till they cannot be squeezed no further. Then
unclenched the Handles 106 and remove the Sealer 104 as shown on Fig. 5
5. Once the joint is secure the strap is ready to be cut. Push down on the Tension Handle 04 until the
strap is cut and slide the tensioner to the right to release the strap from under the Gripper Foot 38 as
shown on Fig-6. The operation cycle is now complete.
Fig. 4
Fig. 5
Fig. 6