DCB FT-66 Series Краткое руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование DCB FT-66 Series. DCB FT-66 Series 6 страниц.

FT-66xx Quick Start Guide

Step 12: Tunnel – Configuration (Server)

This step is only performed for the server tunnel.

The server will default to listening to TCP port 22. For most applications there is no need to change

this value. However, if you need to use a different TCP port for you application, navigate to the Tunnel

– Configuration form and set the port number. You may optionally have the server listen to a second

port number, but again, this is usually not necessary.

Step 13: Tunnel – Configuration (Client)

This step is only performed for the client tunnel(s).

Navigate to the Tunnel – Configuration form. Set the "Connect to Server" field to the Server's LAN2

IP address. Referring to example setup, this would be the 12.29.144.4 address. Set the "port" field to

the same port number set in the previous step. Set the "via interface" to LAN2.

If you have a backup Internet connection on LAN3, you can also set the fail-over fields. In our

example configuration this wold be the 69.252.228.2 address. The "port" field is the same as above

and the "via interface" would be LAN3.

Note: If you have a backup link at client side but not at the server side, it is OK to use the same

"Connect to Server" for both the primary and fail-over settings. Only the "via interface" field needs to

be different. Likewise, if you have a backup link at the server side but not at the client side, the "via

interface" would both be set to LAN2 but the "Connect to Server" would differ for the primary and

fail-over settings.

Step 14: Activate & Store Changes

Activate and save the final configuration. You can now navigate to the Status – Interface page and

verify LAN interfaces. You can also navigate to the Status – Tunnel Log page to determine the state of

the tunnel.

4/16/2020