high pointe EM925RYS Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Микроволновая печь high pointe EM925RYS. high pointe EM925RYS 18 страниц.

16. PRE-SET FUNCTION

(1) Set the clock first. (Consult the instruction of clock setting.)

(2) Set a certain cooking procedure(one or two blocks), the setting method and display are

same as relevant cooking procedure. (Defrosting is beyond pre-set cooking).

Example: If you want to cook the food with 100% microwave power for 10 minutes.

Do it as following:

a. Press "POWER" once to choose 100% microwave power;

b. Press number keys "1","0","0","0" in order to adjust the cooking time;

c. Be careful! Please do not press " START/ +30 SEC." to start cooking.

(3) Press " CLOCK/PRE-SET " to display current time and hour figure is flashing, the icon

" : " keep lighting on.

(4) Press number keys to input the cooking time.For example: to set the time is 12:12, you

can press the number keys "1","2","1","2" in order.

(5) Press " AM/PM " to choose AM or PM. AM or PM will be selected in turn by pressing

the button of " AM/PM " continuously.

(6) Press "START/ +30 SEC." to confirm the preset procedure.When it is confirmed, the

unit will go back the clock states.

(7) When time arrives, the buzzer will sound twice and the cooking starts.

(1)Press "MEMORY" to choose memory 1-5 procedure. The LED will display 1,2,3...5.

(2)If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to set

the procedure. Only one or two stages can be set.

(3) After finishing the setting, press "MEMORY" to save the procedure and turn back to the

waiting states.If press " START/ +30 SEC." ,it can save and operate the setting.

Example: to set the following procedure as the second memory, that is memory 2.

to cook the food with 80% microwave power for 3minutes and 20 seconds.

The steps are as follow:

a. In waiting states, press "MEMORY" twice,stop pressing until the screen displays "2".

b. Press "POWER" three times until "PL8" displays.

c. Press number keys "3","2","0" in order to input the cooking time.

d. Press "MEMORY" to save the setting. Buzzer sounds once then turn back to waiting

states. If you press "START/+30SEC." after the above step, the procedure will be

saved as the memory 2 and operated.

e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure

need to reset.

f. If you want to run the saved procedure, in waiting states, press "MEMORY" twice, screen

displays "2", then press "START/+30SEC." to run.