Dynascan R-58 Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Двухстороннее радио Dynascan R-58. Dynascan R-58 15 страниц.

radio begin to scan priority channel, whenever any activity is detected, the radio

will suspend the scan for 5 seconds. It will then continue to scan unless you press

PTT or ENTER key to end scanning.

Select scan type

In channel/frequency mode, press MENU and press ENT to enter menu mode,

Rotate the Encoder until the display shows "SCANS 010". Press ENT and turn the

Encoder knob again to select the scan type (TO/CO/SE).

TO: Time-operated scan

Even though the radio stops on a busy channel, it will continue scanning the other

channels.

CO: Carrier-operated scan

The radio stops on a busy channel until there is no activity, and then radio begins

scanning the other channels

SE: Search scan

The radio stops on a busy channel and exits the Scan mode.

Setting the VOX sensitivity level

The VOX function is deactivated by default. To activate it follow the procedure

here below:

1. press the MENU and ENT button to enter;

2. turn the Encoder knob until the display shows "VOX? 002" (menu 002);

3. push the ENT key;

4. turn again the Encoder knob and select the desired VOX level (you can

choose amongst 9 different levels);

5. push the ENT key again;

6. to exit, press VFO/MR

Setting the transmission power

To select desired power level:

1. press the MENU and ENT button;

2. turn the Encoder knob until the display shows "POW? 003" (menu 003)

3. push ENT;

4. turn again the Encoder knob and select the desired power level (you can

choose between 2 levels: 'H' and 'L');

5. press ENT

6. press the VFO/MR to exit