Autool C100 Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Ультразвуковой очиститель ювелирных изделий Autool C100. Autool C100 5 страниц. Fuel system cleaner
Keep the engine speed up to 1000 rpm and press the
accelerator every 3~5 minutes to make the engine speed up to
2000 ~ 3000 rpm and keep this state for 30 seconds. Then
keep idle speed.
Do the flushing procedures as above until exhaust the
detergent.
Reconnect the pipes and initialize the throttle.
Caution
It must initialize the Throttle Position Sensor by automotive
scan tool after cleaning. Otherwise the fault indicating lamp
will lighten on, and PCM will record a DTC.
War ranty Ser vice
There are 3 years' warranty for AUTOOL product main unit and
1 year warranty for the accessories since the day the customers
have received the product parcel.
7
War ranty Access
Repair or replace the equipment will be done according to the
specific fault conditions;
We guarantee that all replacement parts, accessories or
equipment are brand new;
When there is a product breakdown that can not be solved
within 90 days, customer should provide video and pictures as
proof, we will bear the freight cost and provide customer the
accessories in need to replace. After receiving the product for
more than 90 days, the customer shall bear the freight cost,
we will provide the accessory for free to replace.
War ranty Access
Product is bought through non-official AUTOOL purchase
channel.
Product failure is caused by incorrect use of the product, use
for other wrong purpose or human factors.
Disclaimer: The AUTOOL Technology Co, Ltd. reserves the right
to change product designs and specifications without prior notice.
The physical appearance and color may differ from those shown
in the instruction manual. Please refer to the actual product. If
you have any question, please contact the dealer or the Autool
service center. The company have the final explanation right of
product and shall not bear any consequences due to
misunderstanding.
8