Autopage Car-Pro CPX-RS2 Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Дистанционное пусковое устройство Autopage Car-Pro CPX-RS2. Autopage Car-Pro CPX-RS2 17 страниц. Remote engine starter

Печатать страницу

A. PROGRAMMING TRANSMITTER:

Note: This remote start system will only retain the last 4 remote transmitters programmed. If the transmitter memory is

exceeded, the security system will start deleting transmitters from memory in chronological order.

PROGRAMMING THE REMOTE TRANSMITTER

1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in the 'ON' position. Within 15 seconds.

2. Push the Programming switch 3 times holding in on the 3

starts to flash then release the valet switch. You are now in the Transmitter programming mode.

3. Press the 'Lock' button on the transmitter until a chirp from the horn / a flash from the parking light / the LED turns on

for 2 seconds to confirming the first transmitter is now programmed.

4. Apply the same procedure (step 3) to program 2

Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.

B. FEATURES PROGRAMMING:

FEATURE "

" PROGRAMMING:

1. Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in the 'OFF' position.

2. Push the Programming switch 1 time and hold it until the LED turns on and (*) one chirp with a long chirp is heard;

then release the Programming switch. You are now in the feature 'I' programming mode.

3. Press and release the transmitter button with the Icon corresponding to the feature with the icon you want to program.

The (optional) horn chirps and the LED will flash then pause indicating a previous setting.

The factory default settings are always [1] LED flash, [1] horn chirp.

4 Depress the transmitter button icon again to change the feature. Simply keep re-depressing the transmitter button icon

again until the module advances to your desired setting.

5. Depress the next desired transmitter icon button corresponding to the feature you want to program.

(*) The Horn must be connected to hear the programming chirps.

Press

One Chirp /

Transmitter

LED one pulse

Button

Factory Default Setting

H3/5 Green Wire = 1 Pulse Remote Start

H3/7 Pink Wire = Factory Security Disarm

Signal Output

H2/4 Brown Wire = Horn Output

Without ignition controlled door locks &

unlocks

Exit

: Turn Ignition to the 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.

RS2

Button Two Push Remote

PROGRAMMING

push, until a long chirp from the horn (optional) and the LED

, 3rd and 4th

Two Chirps /

LED two pulse

H3/5 Green Wire = 3 Pulse Remote Start

H3/7 Pink Wire = Start Status (Shock Sensor

Bypass Control) Output

H2/4 Brown Wire = Rearm Signal Output

Button One push Remote Start

Ignition controlled door locks & unlocks

August, 2005