Autopage RS-777 Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Дистанционное пусковое устройство Autopage RS-777. Autopage RS-777 14 страниц. Remote engine starter with alarm system
1.Before turning off the engine, press the
to confirm.
2.Turn the ignition key to OFF position. (The engine will stay running.)
3.The engine will run until the pre-programmed time elapsed or shutdown input is received.
D. TURBO CHARGE MODE:
Turbo charge mode keeps the engine running after arriving at you destination for a programmable period of 1, 3 or 5
minutes, This allows the vehicle's engine time to conveniently cool down the turbo after you have left the vehicle. To
activate:
1. While the engine is running, pull up the hand brake and place the transmission gear in the park position.
2. Before turning off the engine, press and release
-- The LED will flash indicating the remote start has entered the turbo charge mode
remote.
3. Take the "Ignition Key" from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
-- Engine continues running until the pre-programmed time elapsed. --
Or
1. While the engine is running, pull up the hand brake and place the transmission gear in the park position.
2. Before turning off the engine, ref.2-way HHU quick feature programming (page 6) enable Turbo mode feature
turn on LCD remote.
3. Take the "Ignition Key" from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
-- Engine continues running until the pre-programmed time elapsed. --
NOTE: This feature only applies to vehicles with Turbo Engines.
E. TIMER & DAILY START:
This unit can be programmed to start and run the engine every 3 / 2 hours the engine will run for the programmed
running time and then shut down.
IMPORTANT: Timer Start should be used only in open areas, never start and run the vehicle in on enclosed space as
a garage or carport.
Daily Timer Start: The feature is very useful for the driver who wants to run the vehicle punctually at the same time
next morning. Before set-up of the "Daily Timer Start", you should pre-set the time you intend to start engine (Hour /
Minutes) by Table-2 -1 -7 set up Daily start first.
TIMER START:
Enter :
1. Turn Ignition On => Off
2. After above (1) within 15 seconds, (ref. page-6 2-way HHU quick feature programming => Enable Time start.)
F
ress and hold
button of LCD remote until 3 beeps sound , release and re-press
p
show "
" icon flash on LCD remote (see Table 3), then press
illuminate on LCD display,
start every 3 or 2 hours
Exit : Turn Ignition On (LED and parking light flash 4 times, and siren chirp 4 times confirm exit Time Start).
(p.s. press lock or unlock button to turn off
Daily Start :
Enter :
1. Turn Ignition On => Off
2. After above (1), within 15 sec. ref. page-6 2-way HHU quick feature programming => Enable Daily Start (
F
& hold
button of LCD remote until 3 beeps heard, release and re-press
cursor to "
" (see Table 3), then press
display,
parking light flash / siren chirp 6 times confirm Daily Start programmed.
Exit : Turn Ignition On (LED and parking light flash 4 times, and siren chirp 4 times confirm exit Daily Start).
(p.s. press lock or unlock button to turn off
F. TEMPERATURE CHECK
The unit can monitor the present indoor temperature of the passenger compartment before cooling or heating your
ress and hold
vehicle. P
RS-777 OP REV 1D
button once on the transmitter and the LED indicator will flash 3 times
parking light flash / siren chirp 3 or 2 times confirm. The vehicle is now programmed to
F
button of LCD remote until 2 beeps sound , release and re-press
and
buttons at the same time.
button to activate
icon on 2-way remote)
button to activate Daily Start
icon on 2-way remote)
12
2013/05/29
appear on LCD
F
button until LCD
Time Start.
F
button to move blinking
.
icon illuminate on LCD
F
button for 4
icon
Press